I like to build stuff. I wanted to test out WordPress as a way to share that with the world.
5 thoughts on “About me…”
Just wondering which screws you used for which portion of your outdoor cedar table build? I am fairly new to woodworking and would like to replicate your project. I just don’t want to foul the lumber using screws that are too long or too short.
Hi, I am looking to begin anodizing aluminum. Thankfully I found your anodizing tutorial through google. It has been very informative. I need to buy a power supply and would appreciate some advice. Is this the best place to ask questions?
Sure, ask away. I think you can find some pretty nice power supplies on Amazon & Ebay. My best recommendation is to look for a power supply that has a constant current mode – it will make life much easier.
hey bryan. I am working on the set-up for the anodizing process. Where should I go for practice parts. Also I wouldnt mind picking your brain on some other things. My brother has a lot of ties in the aerospace industry and has guaranteed me that when I set this process up and run some samples successfully he will be able to send me more parts than I can handle.
I would first start by picking up some generic bar stock to work with. Places like Online Metals or McMaster Carr will work if you don’t have a local shop to go to. You might be able to find a place like ProtoLabs and see if they have any bad parts/overrruns/etc. that you could buy from them to start getting used to dealing with more comlpex geometries. Or maybe try to find some local machine shops and just buy their scraps.
Just wondering which screws you used for which portion of your outdoor cedar table build? I am fairly new to woodworking and would like to replicate your project. I just don’t want to foul the lumber using screws that are too long or too short.
Hi, I am looking to begin anodizing aluminum. Thankfully I found your anodizing tutorial through google. It has been very informative. I need to buy a power supply and would appreciate some advice. Is this the best place to ask questions?
Thanks
Sure, ask away. I think you can find some pretty nice power supplies on Amazon & Ebay. My best recommendation is to look for a power supply that has a constant current mode – it will make life much easier.
hey bryan. I am working on the set-up for the anodizing process. Where should I go for practice parts. Also I wouldnt mind picking your brain on some other things. My brother has a lot of ties in the aerospace industry and has guaranteed me that when I set this process up and run some samples successfully he will be able to send me more parts than I can handle.
I would first start by picking up some generic bar stock to work with. Places like Online Metals or McMaster Carr will work if you don’t have a local shop to go to. You might be able to find a place like ProtoLabs and see if they have any bad parts/overrruns/etc. that you could buy from them to start getting used to dealing with more comlpex geometries. Or maybe try to find some local machine shops and just buy their scraps.